Seller. As used herein, “Seller” means PCB:NG, Inc., a New York corporation.
A quotation is an offer to sell, is valid only for the electronic design files on which it was based, and is subject to these terms and conditions, all of which are deemed incorporated therein. Any change to the electronic design files requires an updated quotation. Quotations are valid for only when presented, after which pricing may change without notice. Seller reserves the right to correct clerical and other patent errors in any quotation.
This document from Seller, together with a valid quotation, contains the entire terms and conditions associated with this transaction. The buyer may accept a quotation in any other manner acceptable to Seller. Any terms, conditions or writing addressing the subject matter of this transaction, shall be for the buyer’s internal purposes only and the terms and conditions contained therein shall have no force or effect. Seller objects to any different or additional terms or conditions contained in any request for quotation, purchase order or other writing or document of the buyer, and no such different or additional terms shall be effective or binding upon Seller unless agreed to in writing and signed by an officer of Seller. After Seller accepts an order, buyer is responsible for any delivery delays or charges, in addition to the original price, due to a buyer requested change that is agreed to in writing by Seller.
Buyer may terminate an order in whole or in part at any time by written or electronic notice to firstname.lastname@example.org, effective upon receipt by Seller. Upon receipt of such notice of termination, Seller shall promptly discontinue performance and comply with buyer’s instructions concerning disposition of completed and partially completed items, work in progress, and materials acquired for the applicable order. In the event of termination, Seller shall be paid a minimum charge of $100 up to the full purchase order price depending on work performed prior to receipt of notice of termination. Seller shall be paid the full purchase order price for all goods produced or services performed prior to receipt of notice of termination. This section shall not limit or affect the buyer’s right to cancel this order for breach by Seller.
Any stated delivery time represents Seller’s intended or typical delivery time, but actual delivery times may vary. Seller reserves the right to limit quantities at any time. All parts are shipped FCA (Incoterms 2010) at Seller’s facilities in Brooklyn, NY. Title passes to the buyer at the time and place of delivery to the carrier.
. All prices are quoted and payments shall be made in U.S. Dollars. Payment may be made by Visa, MasterCard, Discover, American Express, or a form of prepayment acceptable to Seller.
The buyer shall pay all duties and sales, excise, use or other taxes arising in connection with this transaction (other than taxes based solely on Seller’s taxable income).
Seller assumes no responsibility for the design of the goods that are the subject of this transaction. To the extent that Seller’s personnel recommend design modifications or provide design analysis, simulation or advice, they do so to help meet the requirements of Seller’s own manufacturing process. The buyer retains sole legal responsibility for the design specifications and performance of the goods that are the subject of this transaction.
SELLER MAKES NO REPRESENTATION OR WARRANTY, WHETHER EXPRESS OR IMPLIED, OF ANY KIND WHATSOEVER WITH RESPECT TO ANY GOODS OR SERVICES, INCLUDING BUT NOT LIMITED TO ANY WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT.
Without limiting the generality of the foregoing, Seller assumes no responsibility or liability for the selection of any materials for the goods that are the subject of this transaction. The buyer is solely responsible for ensuring that materials selected for goods to be manufactured by Seller meet any regulatory requirements or specifications including but not limited to Directive -2011/65/EU on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS Directive) together with any national legislation implementing such Directive, ISO, FDA, UL, CSA, CE, TUV, FCC, NSF, and USP. Any statements made by Seller personnel or specifications provided by Seller regarding materials should be verified by the buyer with the manufacturer of that material.
The buyer shall defend, indemnify and hold harmless Seller (and its employees, representatives and agents) from and against all claims, liabilities, losses, damages, penalties, fines and sanctions of any kind (including, without limitation, interest, attorneys’ fees and expenses, customs duties, fines, taxes, penalties or any other governmental sanctions of any kind) (i) resulting from or arising out of any breach of any representation, warranty or covenant of the buyer or its affiliates hereunder; (ii) if the buyer has supplied Seller with drawings, designs or other specifications for the goods or services, arising out of any assertion that any goods manufactured by Seller (or the act of manufacturing such goods) according to those drawings, designs or other specifications infringe or misappropriate any patent, copyright, trade secret or other proprietary right; (iii) otherwise arising out of or related to this transaction. It is specifically understood that the buyer shall indemnify and defend Seller and hold Seller harmless from claims that Seller was itself negligent or otherwise at fault. If any action, suit or proceeding is commenced, or any claim, demand or assessment asserted against Seller (or its employees, representatives or agents) which may result in liability with respect to which a party seeks indemnification, then the party shall notify the buyer promptly and the buyer shall have the right at its own expense to assume the entire control of the defense, compromise or settlement. Upon the buyer’s request and at the buyer’s expense, Seller shall cooperate fully in such defense and make available to the buyer all relevant information under its control.
Seller shall not be liable for any failure to manufacture, deliver or provide, or for any delay in the manufacture, delivery or provision of, any goods to be provided hereunder if such failure or delay is caused by acts of God, fire, storm, strikes, blackouts, labor difficulties, riots, inability to obtain materials, equipment, labor or transportation, governmental restrictions, serious public health nuisance or any similar cause over which Seller is unable to exercise control. In the event of any shortage of raw materials or other supplies, Seller may allocate materials and supplies among its buyers in such manner as Seller may determine in its sole discretion, and shall have no liability to the buyer on account of any delay or cancellation on account thereof.
Copyright in files. All intellectual property rights to text, illustrations, software files and other materials (“Seller Materials”) provided by Seller to buyer are retained by Seller. Buyer will not, without prior written approval of Seller (which may be withheld for any reason), remove any of Seller’s markings or change in any way the Materials.
Copyright in files. All text, illustrations, software files and other materials (“Buyer Materials”) provided by buyer to Seller and, with the exception of Tooling or Custom Tooling as defined above, any deliverables, designs, or works of authorship in any form, including modifications or derivative works thereof, that may be created or produced for buyer during the course of Seller’s performance of services shall be deemed the sole property of buyer and all right, title and interest therein shall be held solely by buyer.
Seller makes no country of origin certification under this Agreement unless specifically agreed to in writing. Seller specifically disclaims any “passive” certifications included in any of buyer’s documents or communications related to this Agreement.
“Confidential Information” means any information that buyer discloses to the Seller (including without limitation to any of its directors, officers, employees, representatives, professional advisers or other agents (collectively, “Representatives”)), whether in writing, orally, by inspection of objects or otherwise. Confidential Information does not, however, include any: (a) information that was publicly known and made generally available in the public domain prior to the time of disclosure to the Seller by buyer, or becomes publicly known and made generally available after disclosure to the Seller by buyer through no action or inaction of the Seller or its Representatives; (b) information in the possession of the Seller, without confidentiality obligations to buyer, at the time of disclosure by buyer as shown by the Seller’s files and records immediately prior to the time of disclosure; (c) information that is later disclosed to the Seller by a third party under no obligation of confidentiality to buyer and without violation of this Agreement by the Seller or its Representatives; (d) information that is independently developed by the Seller; or (e) information that is required to be disclosed by law or governmental rule or regulation, or in connection with any judicial proceeding.
The Seller will not use any Confidential Information for any purpose except for the purposes of quoting and manufacturing of assembled circuit boards. The Seller will not disclose any Confidential Information to any individual, entity or organization, except to any of the Seller’s Representatives as required for the purposes described herein. The Seller will use the same degree of care (but no less than a reasonable degree of care) to protect the secrecy of and avoid disclosure and unauthorized use of the Confidential Information as the Seller employs with respect to its own confidential and proprietary information. Upon buyer’s written request, the Seller will destroy all documents containing or representing Confidential Information and all copies thereof, and erase any such Confidential Information from the Seller’s computer systems except electronic copies that are electronically archived and not readily accessible. If requested by buyer, Seller will provide written confirmation of such return or destruction and erasure to Buyer.
The buyer represents and warrants to Seller that no information furnished or to be furnished by the buyer to Seller, and no information required to manufacture or sell the goods that are the subject of this transaction, constitutes information classified by the U.S. federal government as confidential, secret or top secret or similar designation by any international government.
Buyer warrants that the goods that are the subject of this transaction: (i) will not be implanted in a human body, and (ii) are not subject to FAA inspection.
IN NO EVENT SHALL SELLER BE LIABLE FOR ANY INCIDENTAL, INDIRECT, CONSEQUENTIAL OR PUNITIVE DAMAGES OF ANY KIND, WHETHER FOR BREACH OF ANY WARRANTY, FOR BREACH OR REPUDIATION OF ANY OTHER TERM OR CONDITION, FOR NEGLIGENCE, ON THE BASIS OF STRICT LIABILITY, OR OTHERWISE. THE GOODS AND SERVICES ARE PROVIDED ONLY FOR BUYER AND/OR BUYER’S CUSTOMER IN CONTRACT PRIVITY WITH BUYER AND ARE NOT FOR THE BENEFIT OF ANY THIRD PARTIES.
Buyer certifies that its designs (e.g., electronic design files) submitted to Seller and the manufacture and delivery of goods according to the Buyer’s design will not yield goods that are in violation of any federal firearms laws. Buyer will not hold Seller liable for any violation of federal firearms laws that occur as a result of manufacturing or delivering any goods according to the design provided by Buyer.
The rights and obligations of Seller and the buyer under this contract shall be governed by the laws of the State of New York(without regard to principles of conflict of law), including the New York Uniform Commercial Code. The United Nations Convention on Contracts for the International Sale of Goods shall not apply to this transaction. Any suit, action or other legal proceeding arising out of or relating to this transaction shall be brought in a court of record in Kings County, New York or in the courts of the United States located in such county. Seller and the buyer each consent to the jurisdiction of each such court in any suit, action or proceeding, and waive any objection which it may have to the laying of venue of any such suit, action or proceeding in any such courts and any claim that any such suit, action or proceeding has been brought in an inconvenient forum. No quotation or contract, or series of quotations or contracts, shall establish any course of dealing or otherwise entitle the buyer to the same or similar terms in any future agreement with Seller. No blanket or similar uncommitted purchase order shall bind Seller, but any instructions issued by the buyer under any such purchase order (whether written, electronic, telephonic or otherwise) will bind the buyer as fully as if provided in a writing signed by the buyer.
All documents, notices and legal proceedings executed, given or instituted pursuant to or relating directly hereto shall be in the English language, and the meaning of all words and phrases of this offer shall be defined, construed and interpreted in the English language.